Colorado Springs Sump Pumps & Specialty Plumbing
Sump Pumps, Ejector Pumps & Specialty Plumbing in Colorado Springs
Sump pump and sewage ejector pump repair, replacement, and installation — plus battery backup systems and backflow preventer services for Colorado Springs homeowners.
Father and Sons Plumbing & Drain installs, repairs, and replaces residential sump pumps and sewage ejector pumps and provides backflow preventer installation and replacement throughout Colorado Springs.
Whether you're dealing with a sump pump that won't run, an ejector pump problem, or a backflow preventer that needs replacement, we'll evaluate the problem and explain your options.
Sump Pump Installation
If your basement or crawl space is vulnerable to groundwater or water intrusion, a properly installed sump pump can help remove collected water before it causes damage.
We evaluate the existing sump pit and drainage setup, the area being protected, discharge routing, and other relevant conditions before recommending a pump for the system. A sump pump installation may include the pump, float controls, check valve, discharge piping, and other components needed for the particular installation. We can also discuss battery backup options for additional protection during a power outage or primary pump failure.
Sump Pump Repair
A sump pump that won't activate, runs continuously, makes unusual noises, or fails to remove water properly should be evaluated before the next time you need it.
We'll inspect the accessible components of the system to help determine what's causing the problem and whether repair or replacement makes more sense. If repair makes sense, we'll explain what needs to be done and give you a flat-rate price before approved work begins.
- Pump won't turn on
- Pump runs continuously
- Pump cycles on and off frequently
- Float switch problems
- Clogged or restricted discharge piping
- Check valve problems
- Unusual grinding, rattling, or humming noises
- Pump runs but doesn't remove water properly
Sump Pump Replacement
Sump pumps don't last forever. Age, operating frequency, water conditions, pump quality, and maintenance can all affect how long a system lasts.
If your pump has become unreliable, has needed repeated repairs, can no longer keep up with incoming water, or is in poor overall condition, replacement may make more sense than continuing to repair it. We'll evaluate the existing system and explain your replacement options based on the sump pit, discharge setup, and demands placed on the pump. Battery backup options can also be discussed when additional protection is appropriate.
Battery Backup Sump Pump Systems
Most primary sump pumps depend on household electrical power. If the power goes out during heavy rain or another period of high groundwater, the primary pump may not be able to operate.
A properly configured battery backup system can provide an additional layer of protection by operating when the primary system loses power or, depending on the system, when the primary pump cannot keep up or fails. We install battery backup sump pump systems and can explain the available options based on your existing sump setup and the level of backup protection you're looking for.
Sewage Ejector Pumps & Ejection Pits
Homes with bathrooms, laundry rooms, or other plumbing fixtures located below the level of the main sewer line may rely on a sewage ejector pump to move wastewater up and into the home's drainage system.
When an ejector pump stops working properly, wastewater may not drain as it should and can eventually lead to backups, odors, or problems around the ejection pit. We diagnose, repair, replace, and install residential sewage ejector pumps and related accessible components. When repair makes sense, we'll explain what needs to be repaired. If the pump is worn out, damaged, or replacement is the better option, we'll walk you through your choices and give you a flat-rate price before approved work begins.
- Ejector pump won't turn on
- Pump runs but doesn't move wastewater properly
- Pump runs continuously or cycles unusually often
- Float switch problems
- Check valve problems
- Unusual grinding, rattling, or humming noises
- Sewage odors around the ejection pit
- Problems with the pit lid or accessible connections
- Aging or failed ejector pumps
- Wastewater backing up into lower-level fixtures
Sewage Ejector Pump Installation & Replacement
If you're adding plumbing below the level of the home's main sewer line, an ejector pump system may be needed to move wastewater into the drainage system.
We'll evaluate the plumbing layout and existing ejection pit when applicable, determine what the system needs, and explain the installation or replacement options. Depending on the system, the work may include the ejector pump, float controls, check valve, discharge piping, pit components, and other necessary plumbing connections. Once the work is complete, we'll test the accessible system components for proper operation and explain anything you should know about your new ejector pump.
Backflow Preventer Installation & Replacement
Backflow preventers help protect the potable water supply by preventing water from flowing in the wrong direction under certain pressure conditions.
When an existing backflow preventer is damaged, no longer functioning properly, or needs to be replaced, we can evaluate the plumbing and discuss the appropriate replacement. We also install new backflow prevention devices for residential plumbing applications within our scope of work. We'll explain what we find, what work is needed, and provide a flat-rate price before approved work begins. If your property requires certified backflow testing or documentation for a water provider or local authority, we'll let you know when a certified backflow tester is required.
Sump Pump Maintenance & Testing
A sump pump may sit unused for long periods before it's suddenly needed. Periodic testing can help identify obvious problems with the system before heavy rain, snowmelt, or rising groundwater puts it to work.
During sump pump service, we can check accessible system components such as pump operation, the float switch, check valve, and discharge piping and look for signs of problems that may affect performance. We recommend homeowners periodically test their sump pump and consider having the system evaluated before seasons when water intrusion is more likely.
Signs Your Sump Pump Needs Attention
Call us if you notice any of the following:
- Pump won't turn on when water rises in the pit
- Pump runs continuously
- Pump cycles on and off unusually often
- Grinding, rattling, or unusual humming noises
- Water remains in the pit while the pump is running
- Water appears in your basement or crawl space despite having a sump pump
- Discharge piping appears clogged, frozen, or damaged
- Pump has become unreliable during periods of heavy water intrusion
- Battery backup system isn't operating properly
Sump Pump & Specialty Plumbing FAQs
- How do I know if my sump pump is working?
- The simplest way to test your sump pump is to slowly pour water into the sump pit until the float rises and the pump activates. The pump should turn on, remove the water, and shut off. If it doesn't activate, runs but doesn't remove water, or makes unusual noises, it should be evaluated. We can also inspect the system during a service visit.
- How often should I test my sump pump?
- We recommend testing your sump pump at least once a year — ideally before seasons when water intrusion is more likely, such as spring snowmelt or periods of heavy rain. A pump that hasn't been tested in a while may have developed a problem that won't be obvious until it's needed.
- Should I repair or replace my sump pump?
- It depends on the age and condition of the pump, the nature of the problem, and the cost of repair relative to replacement. A pump that's relatively new with a straightforward issue is often worth repairing. A pump that's older, has needed repeated repairs, or can no longer keep up with water intrusion may be a better candidate for replacement. We'll evaluate the system and give you an honest recommendation.
- Do I need a battery backup sump pump?
- If your home depends on a sump pump to stay dry, a battery backup is worth considering. Power outages can occur during the same storms that put the most demand on your sump pump. A battery backup system can provide an additional layer of protection when the primary pump loses power or, depending on the system, when it can't keep up. We can explain the available options based on your existing setup.
- Why does my sump pump keep running?
- A sump pump that runs continuously usually points to one of a few problems: the float switch may be stuck in the on position, the discharge line may be clogged or frozen so water is cycling back into the pit, or there may be a significant water intrusion issue the pump can't keep up with. Any of these warrants a service call.
- Why is my sump pump making noise?
- Grinding or rattling noises can indicate a worn or damaged impeller. Loud humming may point to a motor problem or a pump that's running but not moving water. Gurgling sounds are sometimes related to the check valve or discharge piping. Unusual noises are generally a sign that something needs to be evaluated before the pump fails.
- Can you install a sump pump if my home doesn't already have one?
- Yes. We can evaluate the basement or crawl space, assess the sump pit and drainage setup, and discuss installation options. If a sump pit doesn't exist or needs to be modified, we'll explain what's involved before any work begins.
- What is a sewage ejector pump?
- A sewage ejector pump is a pump installed in a sealed pit — called an ejection pit or ejector pit — that collects wastewater from plumbing fixtures located below the level of the home's main sewer line. When the pit fills to a certain level, the pump activates and moves the wastewater up and into the drainage system. Ejector pumps are commonly found in homes with basement bathrooms, laundry rooms, or other below-grade plumbing.
- How do I know if my ejector pump is failing?
- Common signs include slow draining or backups in lower-level fixtures, sewage odors near the ejection pit, the pump running continuously or not activating when it should, unusual grinding or humming noises, or visible problems around the pit lid or connections. If you notice any of these, the system should be evaluated before a failure leads to a backup.
- What's the difference between a sump pump and a sewage ejector pump?
- A sump pump removes groundwater or clean water that collects in a sump pit — it's designed to protect against water intrusion. A sewage ejector pump handles wastewater from plumbing fixtures and is designed to move that waste up to the main sewer line when fixtures are located below grade. The two systems serve different purposes and are not interchangeable.
- How long does a sewage ejector pump last?
- Ejector pump lifespan varies depending on the pump quality, how frequently it runs, and how well the system is maintained. Many pumps last 7–10 years or longer under normal conditions. Pumps that handle heavy use or are in poor condition may fail sooner. If your ejector pump is aging or has been showing signs of problems, it's worth having it evaluated.
- What does a backflow preventer do?
- A backflow preventer is a device installed on a plumbing line to stop water from flowing in the wrong direction. This matters because under certain pressure conditions — such as a drop in municipal water pressure — water can be drawn backward through the plumbing system, potentially contaminating the potable water supply. Backflow preventers are commonly required on irrigation systems, fire suppression systems, and other connections where contamination risk exists.
- Can you replace a failed backflow preventer?
- Yes. If an existing backflow preventer is damaged or no longer functioning properly, we can evaluate the plumbing and discuss replacement options. We'll explain what we find and provide a flat-rate price before approved work begins. If your situation requires certified backflow testing or documentation for a water provider or local authority, we'll let you know when a certified backflow tester is needed.
- Do you charge a service call fee?
- No. There is no service call fee to come out and evaluate your sump pump, ejector pump, or backflow prevention system. You'll receive a flat-rate price after the diagnosis, and you decide whether to proceed. If you choose not to move forward, you owe nothing for the visit.
Sump Pump & Ejector Pump Service Areas
We provide sump pump, ejector pump, and specialty plumbing services throughout Colorado Springs and surrounding communities.
Ready to Schedule Service?
Having trouble with a sump pump, sewage ejector pump, battery backup system, or backflow preventer? We'll evaluate the problem, explain what we find, and give you a flat-rate price before approved work begins.
$0 SERVICE CALL FEE • FLAT-RATE PRICING